Radal CSA-FDW flame detector - external - cable
Patented technology with 100% efficiency for tobacco gas and smoke detection; detection of illicit smoking in outdoor areas subject to rapid ventilation
| Code | CSA-FDW |
| Availability: | Currently unavailable |
| Producer: | CZ - S |
| Category: | Tobacco smoke and flame detectors |
Where is the detector suitable?
The CSA-FDW detector is suitable for less controlled areas such as public toilets, cubicles, changing rooms, discreet areas, employee areas or public buildings where violations of the prohibition on handling fire or smoking tobacco products may be more frequent.
What can the detector do?
It offers detection of illegal smoking in outdoor areas subject to rapid smoke and gas ventilation. It will alert occupants to this fact by a visual alarm, voice message or other acoustic signal. Sensor sensitivity can be adjusted from up to five sensitivity modes. SmartWave© voice message playback software allows a choice of 100 voice messages, time interval, volume and number of replays.
How is the detector powered?
It is powered by an external CSA-006 power module or by 4 AA alkaline batteries. A Fault - Battery is Low" voice message warns of low power and imminent battery discharge.
Can the detector be connected to another device?
The device can be installed stand-alone or can be wired to other devices such as smoke and flame detectors, PIR motion detectors, optical voice detectors or control panels.
If you would like to order a system consisting of multiple devices, please contact us by phone or email.
Where to install the detector?
Suitable for installation in open spaces, building entrances and exits, rooms with high ceilings or areas that are exposed to occasional smoke or steam.
Can be installed on the ceiling or wall.
Accessories:
For more convenient operation of a single detector or an entire system of multiple RADAL Cig-Arrete detectors, the CSA-IR2 wireless remote control (not included) can be used.
*certification: CE, EQC
Advantages:
Designed for both indoor and outdoor installations
Suitable for areas occasionally exposed to smoke or steam
Patented tobacco smoke detection technology
Deactivation mode option
Powered by an external CSA-006 power module or AA alkaline batteries
Acoustic end of battery life warning
Can be controlled by the CSA-IR2 remote control (not included)
| Acoustic signal | prostřednictvím přednastavených hlasových zprávy |
| Certification | CE, EQC |
| Receiver sensitivity | Vysoká, středně vysoká, normální, středně nízká, nízká nebo vypnuto |
| Weight | 0,75 kg |
| Material | GRP plast vyztužená vlákna |
| Power | DC, 4 ks alkalické baterie 1,5 V typu AA (baterie nejsou součástí balení), pomocí AC adaptéru CSA-SMPSU, pomocí externího napájecího modulu CSA-006 nebo externího napájecího boxu CSA-EBB |
| Working temperature | -10°C - 50°C |
| Connecting detectors | Wired 8 - 28 V, Wired 6 V |
| Current draw | <250 mA |
| Operating humidity | 0 - 95% RH nekondenzující |
| Product dimension | 198 x 152 x 78 mm mm |
| End-of-life signalling | hlasová zpráva |
| Static current | <0,5 mA |
| Retrieved from | Kabelový |
| Mounting method | Na strop nebo stěnu (šrouby nejsou součástí balení) |
Settings