Hydrogen and oxygen inhaler
H2-300M Hydrogen and Oxygen Inhaler - a state-of-the-art device with SPE PEM technology and titanium electrodes for the production of 99.99% pure hydrogen and oxygen. It offers the possibility to inhale hydrogen, oxygen or a combination of both. Stable
| Code | H2-300M |
| Availability: | In stock at the supplier |
| Category: | Respiratory protection |
The H2-300M inhaler represents the state-of-the-art technology for the production of molecular hydrogen and oxygen with a high purity of 99.99%. The advanced electrolytic system with titanium electrodes and DuPont membrane ensures stable and safe gas production without unwanted impurities. This model offers the option of inhaling hydrogen and oxygen separately or in combination, allowing therapy to be tailored to individual needs. With stable pressure, quiet operation and intuitive controls, the H2-300M provides maximum comfort and efficiency in daily use. Only pharmaceutical-grade distilled water is required to keep the device working reliably and safely over the long term.
The device uses a solid polymer electrolyte (SPE) with titanium electrodes to electrolyse water, breaking it down into hydrogen and oxygen. Hydrogen is produced at the cathode and oxygen at the anode. These gases can be inhaled separately or in combination.
Molecular hydrogen is one of the latest discoveries in health research and is considered one of the most effective antioxidants. Research shows that its inhalation produces rapid and intense effects, making it an ideal choice for supporting the body.Due to its extremely small molecular size, hydrogen can penetrate all tissues and cells within seconds. This helps to protect cells from oxidative stress and harmful free radicals.
Inhalation of molecular hydrogen is especially recommended for acute and chronic inflammation of the airways and in cases of increased oxidative stress. Natural regeneration support, fast absorption and effectiveness make this inhaler a great helper for your health.
Hydrogen purity: 99.99%
Maximum hydrogen flow rate: 300 ml/min
Oxygen purity: 99.99%
Maximum oxygen flow rate: 150 ml/min
Dimensions: 365 × 235 × 400 mm
Weight: 15 kg
The pressure stability is less than 0.001 MPa, which ensures safe production of high purity gases without fluctuations that could affect the performance of the instrument.
Only pharmaceutical grade distilled water purchased from a pharmacy should be used. Technical distilled water is not suitable and could damage the equipment.
Power supply: 220 V ± 10%, 50 to 60 Hz
Power consumption: 120 W
The lifetime of the device is approximately 8,000 hours of operation.
The appliance incorporates a high-sensitivity automatic control system that monitors gas flow and pressure. This ensures stable and safe operation.
The H2-300M uses MEA/PEM (Membrane Electrode Assembly / Proton Exchange Membrane) technology, which is developed in the USA and ensures efficient and clean hydrogen and oxygen production.
Yes, the device complies with the RoHS (Restriction of Hazardous Substances) Directive 2015/863/EU and complies with the EC Regulation 1907/2006 REACH (Registration, Evaluation and Authorisation of Chemicals).
High purity of the hydrogen and oxygen produced
Possibility to inhale H₂, O₂ or a combination separately
Stable pressure and safe operation
Low energy consumption
Advanced technology for efficient production of gaseous mixtures
| Oxygen purity | 99,99% |
| Hydrogen purity | 99,99% |
| Weight | 15 kg |
| Maximum oxygen flow rate | 150 ml/min |
| Maximum hydrogen flow rate | 300 ml/min |
| Possibility of inhalation | H2 nebo O2 nebo kombinace |
| Power | 220 V ± 10 % 50 až 60 Hz |
| Dimensions | 365x235x400 mm |
| Energy consumption | 120W |
| Pressure stability | 0,001 Mpa |
| Lifetime | 8 000 hodin |
Settings