Why buy a sorbent?
Polypropylene has been used for the production of the low sorbent carpet, which is characterised by its chemical and mechanical resistance. The carpet belongs to the PREMIUM product line. The carpet is a very effective means of capturing spills that occur over a larger area. It protects the floor under machinery or in busy corridors and prevents slippery surfaces from forming when dangerous liquids leak. The roll of carpet comes in 40 cm × 40 m.
Benefits
Due to the large internal volume of the fabric and the large surface area of the microfibres, this sorbent has a high sorption capacity.
Thickness of the textile sorbent
A thick sorbent is a fabric with a higher basis weight and thickness. As a result, it can absorb large quantities of leaked liquids. It is best used in operations with a risk of large or continuous spills of hazardous substances
Textile sorbent design
Carpet is excellent for covering large areas, for example under machinery or in busy corridors. Suitable for everyday use.
Application
Textile universal sorbents are designed for the sorption of all non-aggressive liquids. They quickly and safely suck up emulsions, oils, fats, petroleum substances, solvents, water, aqueous solutions or weak chemical solutions. They are used in warehousing, manufacturing or repair facilities to prevent the release of hazardous substances or to deal with emergency situations in the event of a sudden release of these liquids.
The use of these sorbents will provide you with:
Perforation
Perforation allows you to tear off the necessary piece of fabric and better use the sorbent surface area. With this MRHF 4040 sorbent, the transverse perforation allows it to be adapted to the needs of a specific workplace, for example to cover rugged surfaces.
Packaging
The sorbents are supplied in a practical dispensing box that protects them from being soiled and degraded before use. It helps to preserve sorption capacity (with area under long-term loading, sorption capacity can be reduced by loss of free volume). This packaging makes the sorbent ready for immediate use.
Notice
These sorbents cannot be used for extracting oil from the water surface as they preferentially absorb water and aqueous solutions and therefore sink to the bottom.
Disposal of used sorbents
Disposal of used sorbents is governed by the properties of the absorbed liquids, by internal guidelines for handling chemicals and also by law - important laws are No. 185/2001 Coll. on waste or No. 350/2011 Coll. on chemicals and mixtures. We recommend that hazardous waste is handed over to a specialised company for the disposal of hazardous substances.
Sorbent ranges
PREMIUM series textile sorbents are made of special microfibre non-woven polypropylene fabric. Their surface is coated with a thin protective layer that protects the sorbent against abrasion and fiber release. The fabric is also reinforced by ultrasonic bonding, thus greatly increasing its strength. This allows workers to walk over the sorbents. Sorbents from this range are suitable for use in areas where higher mechanical resistance and absolutely minimal fibre release from the surface is required.
| Number of pieces in the package | 80 útržků |
| Dimensions | 40 cm x 40 m |
| Sorption capacity | 81 litrů |
Settings